[BACK]Return to configure CVS log [TXT][DIR] Up to [local] / OpenXM_contrib2 / asir2000

Diff for /OpenXM_contrib2/asir2000/configure between version 1.53 and 1.69

version 1.53, 2012/05/30 02:24:33 version 1.69, 2019/03/26 08:10:13
Line 1 
Line 1 
 #! /bin/sh  #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.  # Guess values for system-dependent variables and create Makefiles.
 # Generated by GNU Autoconf 2.68.  # Generated by GNU Autoconf 2.69 for asir 1.15.
 #  #
 #  #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,  # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software  
 # Foundation, Inc.  
 #  #
 #  #
 # This configure script is free software; the Free Software Foundation  # This configure script is free software; the Free Software Foundation
Line 134  export LANGUAGE
Line 132  export LANGUAGE
 # CDPATH.  # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH  (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
   
   # Use a proper internal environment variable to ensure we don't fall
     # into an infinite loop, continuously re-executing ourselves.
     if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
       _as_can_reexec=no; export _as_can_reexec;
       # We cannot yet assume a decent shell, so we have to provide a
   # neutralization value for shells without unset; and this also
   # works around shells that cannot unset nonexistent variables.
   # Preserve -v and -x to the replacement shell.
   BASH_ENV=/dev/null
   ENV=/dev/null
   (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
   case $- in # ((((
     *v*x* | *x*v* ) as_opts=-vx ;;
     *v* ) as_opts=-v ;;
     *x* ) as_opts=-x ;;
     * ) as_opts= ;;
   esac
   exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
   # Admittedly, this is quite paranoid, since all the known shells bail
   # out after a failed `exec'.
   $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
   as_fn_exit 255
     fi
     # We don't want this to propagate to other subprocesses.
             { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then  if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :    as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh    emulate sh
Line 167  if ( set x; as_fn_ret_success y && test x = \"\$1\" );
Line 190  if ( set x; as_fn_ret_success y && test x = \"\$1\" );
 else  else
   exitcode=1; echo positional parameters were not saved.    exitcode=1; echo positional parameters were not saved.
 fi  fi
 test x\$exitcode = x0 || exit 1"  test x\$exitcode = x0 || exit 1
   test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO    as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO    as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&    eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
Line 212  IFS=$as_save_IFS
Line 236  IFS=$as_save_IFS
   
   
       if test "x$CONFIG_SHELL" != x; then :        if test "x$CONFIG_SHELL" != x; then :
   # We cannot yet assume a decent shell, so we have to provide a    export CONFIG_SHELL
         # neutralization value for shells without unset; and this also               # We cannot yet assume a decent shell, so we have to provide a
         # works around shells that cannot unset nonexistent variables.  # neutralization value for shells without unset; and this also
         # Preserve -v and -x to the replacement shell.  # works around shells that cannot unset nonexistent variables.
         BASH_ENV=/dev/null  # Preserve -v and -x to the replacement shell.
         ENV=/dev/null  BASH_ENV=/dev/null
         (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV  ENV=/dev/null
         export CONFIG_SHELL  (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
         case $- in # ((((  case $- in # ((((
           *v*x* | *x*v* ) as_opts=-vx ;;    *v*x* | *x*v* ) as_opts=-vx ;;
           *v* ) as_opts=-v ;;    *v* ) as_opts=-v ;;
           *x* ) as_opts=-x ;;    *x* ) as_opts=-x ;;
           * ) as_opts= ;;    * ) as_opts= ;;
         esac  esac
         exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}  exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
   # Admittedly, this is quite paranoid, since all the known shells bail
   # out after a failed `exec'.
   $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
   exit 255
 fi  fi
   
     if test x$as_have_required = xno; then :      if test x$as_have_required = xno; then :
Line 328  $as_echo X"$as_dir" |
Line 356  $as_echo X"$as_dir" |
   
   
 } # as_fn_mkdir_p  } # as_fn_mkdir_p
   
   # as_fn_executable_p FILE
   # -----------------------
   # Test if FILE is an executable regular file.
   as_fn_executable_p ()
   {
     test -f "$1" && test -x "$1"
   } # as_fn_executable_p
 # as_fn_append VAR VALUE  # as_fn_append VAR VALUE
 # ----------------------  # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take  # Append the text in VALUE to the end of the definition contained in VAR. Take
Line 449  as_cr_alnum=$as_cr_Letters$as_cr_digits
Line 485  as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||    chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }      { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
   
     # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
     # already done that, so ensure we don't try to do so again and fall
     # in an infinite loop.  This has already happened in practice.
     _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems    # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the    # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).    # original and so on.  Autoconf is especially sensitive to this).
Line 483  if (echo >conf$$.file) 2>/dev/null; then
Line 523  if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:      # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.      # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.      # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
     # In both cases, we have to default to `cp -p'.      # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||      ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
       as_ln_s='cp -p'        as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then    elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln      as_ln_s=ln
   else    else
     as_ln_s='cp -p'      as_ln_s='cp -pR'
   fi    fi
 else  else
   as_ln_s='cp -p'    as_ln_s='cp -pR'
 fi  fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file  rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null  rmdir conf$$.dir 2>/dev/null
Line 504  else
Line 544  else
   as_mkdir_p=false    as_mkdir_p=false
 fi  fi
   
 if test -x / >/dev/null 2>&1; then  as_test_x='test -x'
   as_test_x='test -x'  as_executable_p=as_fn_executable_p
 else  
   if ls -dL / >/dev/null 2>&1; then  
     as_ls_L_option=L  
   else  
     as_ls_L_option=  
   fi  
   as_test_x='  
     eval sh -c '\''  
       if test -d "$1"; then  
         test -d "$1/.";  
       else  
         case $1 in #(  
         -*)set "./$1";;  
         esac;  
         case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((  
         ???[sx]*):;;*)false;;esac;fi  
     '\'' sh  
   '  
 fi  
 as_executable_p=$as_test_x  
   
 # Sed expression to map a string onto a valid CPP name.  # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"  as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
Line 555  MFLAGS=
Line 575  MFLAGS=
 MAKEFLAGS=  MAKEFLAGS=
   
 # Identity of this package.  # Identity of this package.
 PACKAGE_NAME=  PACKAGE_NAME='asir'
 PACKAGE_TARNAME=  PACKAGE_TARNAME='asir'
 PACKAGE_VERSION=  PACKAGE_VERSION='1.15'
 PACKAGE_STRING=  PACKAGE_STRING='asir 1.15'
 PACKAGE_BUGREPORT=  PACKAGE_BUGREPORT=''
 PACKAGE_URL=  PACKAGE_URL=''
   
 ac_unique_file="LICENSE"  ac_unique_file="LICENSE"
 # Factoring default headers for most tests.  # Factoring default headers for most tests.
Line 603  ac_subst_vars='am__EXEEXT_FALSE
Line 623  ac_subst_vars='am__EXEEXT_FALSE
 am__EXEEXT_TRUE  am__EXEEXT_TRUE
 LTLIBOBJS  LTLIBOBJS
 LIBOBJS  LIBOBJS
   WSLIB
 asm_obj  asm_obj
 USE_GC_SPARC64  USE_GC_SPARC64
 libasir_postfix  libasir_postfix
 LAPACKLIB  LAPACKLIB
 FEPLIB  FEPLIB
   GMPLIB
 USE_PLOT_FALSE  USE_PLOT_FALSE
 USE_PLOT_TRUE  USE_PLOT_TRUE
 XPMLIB  XPMLIB
Line 634  LN_S
Line 656  LN_S
 am__fastdepCC_FALSE  am__fastdepCC_FALSE
 am__fastdepCC_TRUE  am__fastdepCC_TRUE
 CCDEPMODE  CCDEPMODE
   am__nodep
 AMDEPBACKSLASH  AMDEPBACKSLASH
 AMDEP_FALSE  AMDEP_FALSE
 AMDEP_TRUE  AMDEP_TRUE
 am__quote  
 am__include  am__include
 DEPDIR  DEPDIR
 OBJEXT  OBJEXT
Line 650  CC
Line 672  CC
 MAINT  MAINT
 MAINTAINER_MODE_FALSE  MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE  MAINTAINER_MODE_TRUE
   AM_BACKSLASH
   AM_DEFAULT_VERBOSITY
   AM_DEFAULT_V
   AM_V
 am__untar  am__untar
 am__tar  am__tar
 AMTAR  AMTAR
Line 722  PACKAGE_VERSION
Line 748  PACKAGE_VERSION
 PACKAGE_TARNAME  PACKAGE_TARNAME
 PACKAGE_NAME  PACKAGE_NAME
 PATH_SEPARATOR  PATH_SEPARATOR
 SHELL'  SHELL
   am__quote'
 ac_subst_files=''  ac_subst_files=''
 ac_user_opts='  ac_user_opts='
 enable_option_checking  enable_option_checking
   enable_silent_rules
 enable_maintainer_mode  enable_maintainer_mode
 enable_dependency_tracking  enable_dependency_tracking
 with_x  with_x
Line 734  with_asir_gc
Line 762  with_asir_gc
 with_distdir  with_distdir
 with_pari  with_pari
 enable_plot  enable_plot
   enable_static_gmp
 enable_interval  enable_interval
 enable_fft_float  enable_fft_float
 with_mpi  with_mpi
Line 790  sharedstatedir='${prefix}/com'
Line 819  sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'  localstatedir='${prefix}/var'
 includedir='${prefix}/include'  includedir='${prefix}/include'
 oldincludedir='/usr/include'  oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE}'  docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
 infodir='${datarootdir}/info'  infodir='${datarootdir}/info'
 htmldir='${docdir}'  htmldir='${docdir}'
 dvidir='${docdir}'  dvidir='${docdir}'
Line 1205  target=$target_alias
Line 1234  target=$target_alias
 if test "x$host_alias" != x; then  if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then    if test "x$build_alias" = x; then
     cross_compiling=maybe      cross_compiling=maybe
     $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.  
     If a cross compiler is detected then cross compile mode will be used" >&2  
   elif test "x$build_alias" != "x$host_alias"; then    elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes      cross_compiling=yes
   fi    fi
Line 1292  if test "$ac_init_help" = "long"; then
Line 1319  if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.    # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.    # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF    cat <<_ACEOF
 \`configure' configures this package to adapt to many kinds of systems.  \`configure' configures asir 1.15 to adapt to many kinds of systems.
   
 Usage: $0 [OPTION]... [VAR=VALUE]...  Usage: $0 [OPTION]... [VAR=VALUE]...
   
Line 1340  Fine tuning of the installation directories:
Line 1367  Fine tuning of the installation directories:
   --infodir=DIR           info documentation [DATAROOTDIR/info]    --infodir=DIR           info documentation [DATAROOTDIR/info]
   --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]    --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
   --mandir=DIR            man documentation [DATAROOTDIR/man]    --mandir=DIR            man documentation [DATAROOTDIR/man]
   --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]    --docdir=DIR            documentation root [DATAROOTDIR/doc/asir]
   --htmldir=DIR           html documentation [DOCDIR]    --htmldir=DIR           html documentation [DOCDIR]
   --dvidir=DIR            dvi documentation [DOCDIR]    --dvidir=DIR            dvi documentation [DOCDIR]
   --pdfdir=DIR            pdf documentation [DOCDIR]    --pdfdir=DIR            pdf documentation [DOCDIR]
Line 1366  _ACEOF
Line 1393  _ACEOF
 fi  fi
   
 if test -n "$ac_init_help"; then  if test -n "$ac_init_help"; then
     case $ac_init_help in
        short | recursive ) echo "Configuration of asir 1.15:";;
      esac
   cat <<\_ACEOF    cat <<\_ACEOF
   
 Optional Features:  Optional Features:
   --disable-option-checking  ignore unrecognized --enable/--with options    --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)    --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]    --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful    --enable-silent-rules   less verbose build output (undo: "make V=1")
                           (and sometimes confusing) to the casual installer    --disable-silent-rules  verbose build output (undo: "make V=0")
   --disable-dependency-tracking  speeds up one-time build    --enable-maintainer-mode
   --enable-dependency-tracking   do not reject slow dependency extractors                            enable make rules and dependencies not useful (and
                             sometimes confusing) to the casual installer
     --enable-dependency-tracking
                             do not reject slow dependency extractors
     --disable-dependency-tracking
                             speeds up one-time build
   --enable-shared         enable linking shared libraries.  [no]    --enable-shared         enable linking shared libraries.  [no]
   --enable-plot           enable plot feature. [no]    --enable-plot           enable plot feature. [no]
     --enable-static-gmp     force to link statically with gmp. [no]
   --enable-interval       enable interval feature. [no]    --enable-interval       enable interval feature. [no]
   --enable-fft-float      enable FFT-FLOAT feature. [no]    --enable-fft-float      enable FFT-FLOAT feature. [no]
   
Line 1474  fi
Line 1509  fi
 test -n "$ac_init_help" && exit $ac_status  test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then  if $ac_init_version; then
   cat <<\_ACEOF    cat <<\_ACEOF
 configure  asir configure 1.15
 generated by GNU Autoconf 2.68  generated by GNU Autoconf 2.69
   
 Copyright (C) 2010 Free Software Foundation, Inc.  Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation  This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.  gives unlimited permission to copy, distribute and modify it.
 _ACEOF  _ACEOF
Line 1590  $as_echo "$ac_try_echo"; } >&5
Line 1625  $as_echo "$ac_try_echo"; } >&5
          test ! -s conftest.err           test ! -s conftest.err
        } && test -s conftest$ac_exeext && {         } && test -s conftest$ac_exeext && {
          test "$cross_compiling" = yes ||           test "$cross_compiling" = yes ||
          $as_test_x conftest$ac_exeext           test -x conftest$ac_exeext
        }; then :         }; then :
   ac_retval=0    ac_retval=0
 else  else
Line 1820  int
Line 1855  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) >= 0)];  static int test_array [1 - 2 * !(($2) >= 0)];
 test_array [0] = 0  test_array [0] = 0;
   return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1836  int
Line 1872  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];  static int test_array [1 - 2 * !(($2) <= $ac_mid)];
 test_array [0] = 0  test_array [0] = 0;
   return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1862  int
Line 1899  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) < 0)];  static int test_array [1 - 2 * !(($2) < 0)];
 test_array [0] = 0  test_array [0] = 0;
   return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1878  int
Line 1916  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) >= $ac_mid)];  static int test_array [1 - 2 * !(($2) >= $ac_mid)];
 test_array [0] = 0  test_array [0] = 0;
   return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1912  int
Line 1951  int
 main ()  main ()
 {  {
 static int test_array [1 - 2 * !(($2) <= $ac_mid)];  static int test_array [1 - 2 * !(($2) <= $ac_mid)];
 test_array [0] = 0  test_array [0] = 0;
   return test_array [0];
   
   ;    ;
   return 0;    return 0;
Line 1984  cat >config.log <<_ACEOF
Line 2024  cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while  This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.  running configure, to aid debugging if configure makes a mistake.
   
 It was created by $as_me, which was  It was created by asir $as_me 1.15, which was
 generated by GNU Autoconf 2.68.  Invocation command line was  generated by GNU Autoconf 2.69.  Invocation command line was
   
   $ $0 $@    $ $0 $@
   
Line 2473  test -n "$target_alias" &&
Line 2513  test -n "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \    test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&      NONENONEs,x,x, &&
   program_prefix=${target_alias}-    program_prefix=${target_alias}-
 am__api_version='1.11'  am__api_version='1.16'
   
 # Find a good install program.  We prefer a C program (faster),  # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or  # so one script is as good as another.  But avoid the broken or
Line 2512  case $as_dir/ in #((
Line 2552  case $as_dir/ in #((
     # by default.      # by default.
     for ac_prog in ginstall scoinst install; do      for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do        for ac_exec_ext in '' $ac_executable_extensions; do
         if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then          if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
           if test $ac_prog = install &&            if test $ac_prog = install &&
             grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then              grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
             # AIX install.  It has an incompatible calling convention.              # AIX install.  It has an incompatible calling convention.
Line 2570  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m
Line 2610  test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m
   
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }  $as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case  
 sleep 1  
 echo timestamp > conftest.file  
 # Reject unsafe characters in $srcdir or the absolute working directory  # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.  # name.  Accept space and tab only in the latter.
 am_lf='  am_lf='
Line 2583  case `pwd` in
Line 2620  case `pwd` in
 esac  esac
 case $srcdir in  case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \     ]*)    *[\\\"\#\$\&\'\`$am_lf\ \     ]*)
     as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;      as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
 esac  esac
   
 # Do `set' in a subshell so we don't clobber the current shell's  # Do 'set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a  # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks  # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing  # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).  # directory).
 if (  if (
    set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`     am_has_slept=no
    if test "$*" = "X"; then     for am_try in 1 2; do
       # -L didn't work.       echo "timestamp, slept: $am_has_slept" > conftest.file
       set X `ls -t "$srcdir/configure" conftest.file`       set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    fi       if test "$*" = "X"; then
    rm -f conftest.file          # -L didn't work.
    if test "$*" != "X $srcdir/configure conftest.file" \          set X `ls -t "$srcdir/configure" conftest.file`
       && test "$*" != "X conftest.file $srcdir/configure"; then       fi
        if test "$*" != "X $srcdir/configure conftest.file" \
           && test "$*" != "X conftest.file $srcdir/configure"; then
   
       # If neither matched, then we have a broken ls.  This can happen          # If neither matched, then we have a broken ls.  This can happen
       # if, for instance, CONFIG_SHELL is bash and it inherits a          # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually          # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".          # happened.  Such a system could not be considered "sane".
       as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken          as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
 alias in your environment" "$LINENO" 5    alias in your environment" "$LINENO" 5
    fi       fi
        if test "$2" = conftest.file || test $am_try -eq 2; then
          break
        fi
        # Just in case.
        sleep 1
        am_has_slept=yes
      done
    test "$2" = conftest.file     test "$2" = conftest.file
    )     )
 then  then
Line 2620  Check your system clock" "$LINENO" 5
Line 2665  Check your system clock" "$LINENO" 5
 fi  fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }  $as_echo "yes" >&6; }
   # If we didn't sleep, we still need to ensure time stamps of config.status and
   # generated files are strictly newer.
   am_sleep_pid=
   if grep 'slept: no' conftest.file >/dev/null 2>&1; then
     ( sleep 1 ) &
     am_sleep_pid=$!
   fi
   
   rm -f conftest.file
   
 test "$program_prefix" != NONE &&  test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"    program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.  # Use a double $ so make ignores it.
Line 2630  test "$program_suffix" != NONE &&
Line 2685  test "$program_suffix" != NONE &&
 ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'  ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
 program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`  program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
   
 # expand $ac_aux_dir to an absolute path  # Expand $ac_aux_dir to an absolute path.
 am_aux_dir=`cd $ac_aux_dir && pwd`  am_aux_dir=`cd "$ac_aux_dir" && pwd`
   
 if test x"${MISSING+set}" != xset; then  if test x"${MISSING+set}" != xset; then
   case $am_aux_dir in    case $am_aux_dir in
Line 2642  if test x"${MISSING+set}" != xset; then
Line 2697  if test x"${MISSING+set}" != xset; then
   esac    esac
 fi  fi
 # Use eval to expand $SHELL  # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then  if eval "$MISSING --is-lightweight"; then
   am_missing_run="$MISSING --run "    am_missing_run="$MISSING "
 else  else
   am_missing_run=    am_missing_run=
   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}  $as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
 fi  fi
   
 if test x"${install_sh}" != xset; then  if test x"${install_sh+set}" != xset; then
   case $am_aux_dir in    case $am_aux_dir in
   *\ * | *\     *)    *\ * | *\     *)
     install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;      install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
Line 2659  if test x"${install_sh}" != xset; then
Line 2714  if test x"${install_sh}" != xset; then
   esac    esac
 fi  fi
   
 # Installed binaries are usually stripped using `strip' when the user  # Installed binaries are usually stripped using 'strip' when the user
 # run `make install-strip'.  However `strip' might not be the right  # run "make install-strip".  However 'strip' might not be the right
 # tool to use in cross-compilation environments, therefore Automake  # tool to use in cross-compilation environments, therefore Automake
 # will honor the `STRIP' environment variable to overrule this program.  # will honor the 'STRIP' environment variable to overrule this program.
 if test "$cross_compiling" != no; then  if test "$cross_compiling" != no; then
   if test -n "$ac_tool_prefix"; then    if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.    # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
Line 2681  do
Line 2736  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2721  do
Line 2776  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"      ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2772  do
Line 2827  do
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do      for ac_prog in mkdir gmkdir; do
          for ac_exec_ext in '' $ac_executable_extensions; do           for ac_exec_ext in '' $ac_executable_extensions; do
            { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue             as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
            case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(             case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
              'mkdir (GNU coreutils) '* | \               'mkdir (GNU coreutils) '* | \
              'mkdir (coreutils) '* | \               'mkdir (coreutils) '* | \
Line 2801  fi
Line 2856  fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }  $as_echo "$MKDIR_P" >&6; }
   
 mkdir_p="$MKDIR_P"  
 case $mkdir_p in  
   [\\/$]* | ?:[\\/]*) ;;  
   */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;  
 esac  
   
 for ac_prog in gawk mawk nawk awk  for ac_prog in gawk mawk nawk awk
 do  do
   # Extract the first word of "$ac_prog", so it can be a program name with args.    # Extract the first word of "$ac_prog", so it can be a program name with args.
Line 2825  do
Line 2874  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"      ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 2889  else
Line 2938  else
 fi  fi
 rmdir .tst 2>/dev/null  rmdir .tst 2>/dev/null
   
   # Check whether --enable-silent-rules was given.
   if test "${enable_silent_rules+set}" = set; then :
     enableval=$enable_silent_rules;
   fi
   
   case $enable_silent_rules in # (((
     yes) AM_DEFAULT_VERBOSITY=0;;
      no) AM_DEFAULT_VERBOSITY=1;;
       *) AM_DEFAULT_VERBOSITY=1;;
   esac
   am_make=${MAKE-make}
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
   $as_echo_n "checking whether $am_make supports nested variables... " >&6; }
   if ${am_cv_make_support_nested_variables+:} false; then :
     $as_echo_n "(cached) " >&6
   else
     if $as_echo 'TRUE=$(BAR$(V))
   BAR0=false
   BAR1=true
   V=1
   am__doit:
           @$(TRUE)
   .PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
     am_cv_make_support_nested_variables=yes
   else
     am_cv_make_support_nested_variables=no
   fi
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
   $as_echo "$am_cv_make_support_nested_variables" >&6; }
   if test $am_cv_make_support_nested_variables = yes; then
       AM_V='$(V)'
     AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
   else
     AM_V=$AM_DEFAULT_VERBOSITY
     AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
   fi
   AM_BACKSLASH='\'
   
 if test "`cd $srcdir && pwd`" != "`pwd`"; then  if test "`cd $srcdir && pwd`" != "`pwd`"; then
   # Use -I$(srcdir) only when $(srcdir) != ., so that make's output    # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
   # is not polluted with repeated "-I."    # is not polluted with repeated "-I."
Line 2910  fi
Line 2998  fi
   
   
 # Define the identity of the package.  # Define the identity of the package.
  PACKAGE=asir   PACKAGE='asir'
  VERSION=20030307   VERSION='1.15'
   
   
 cat >>confdefs.h <<_ACEOF  cat >>confdefs.h <<_ACEOF
Line 2939  AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
Line 3027  AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
   
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}  MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
   
 # We need awk for the "check" target.  The system "awk" is bad on  # For better backward compatibility.  To be removed once Automake 1.9.x
 # some platforms.  # dies out for good.  For more background, see:
 # Always define AMTAR for backward compatibility.  # <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
   # <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
   mkdir_p='$(MKDIR_P)'
   
 AMTAR=${AMTAR-"${am_missing_run}tar"}  # We need awk for the "check" target (and possibly the TAP driver).  The
   # system "awk" is bad on some platforms.
   # Always define AMTAR for backward compatibility.  Yes, it's still used
   # in the wild :-(  We should find a proper way to deprecate it ...
   AMTAR='$${TAR-tar}'
   
 am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'  
   
   # We'll loop over all known methods to create a tar archive until one works.
   _am_tools='gnutar  pax cpio none'
   
   am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
   
   
   
   
   
   
   # POSIX will say in a future version that running "rm -f" with no argument
   # is OK; and we want to be able to make that assumption in our Makefile
   # recipes.  So use an aggressive probe to check that the usage we want is
   # actually supported "in the wild" to an acceptable degree.
   # See automake bug#10828.
   # To make any issue more visible, cause the running configure to be aborted
   # by default if the 'rm' program in use doesn't match our expectations; the
   # user can still override this though.
   if rm -f && rm -fr && rm -rf; then : OK; else
     cat >&2 <<'END'
   Oops!
   
   Your 'rm' program seems unable to run without file operands specified
   on the command line, even when the '-f' option is present.  This is contrary
   to the behaviour of most rm programs out there, and not conforming with
   the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
   
   Please tell bug-automake@gnu.org about your system, including the value
   of your $PATH and any error possibly output before this message.  This
   can help us improve future automake versions.
   
   END
     if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
       echo 'Configuration will proceed anyway, since you have set the' >&2
       echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
       echo >&2
     else
       cat >&2 <<'END'
   Aborting the configuration process, to ensure you take notice of the issue.
   
   You can download and install GNU coreutils to get an 'rm' implementation
   that behaves properly: <https://www.gnu.org/software/coreutils/>.
   
   If you want to complete the configuration process using your problematic
   'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
   to "yes", and re-run configure.
   
   END
       as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
     fi
   fi
   
   
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }  $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
     # Check whether --enable-maintainer-mode was given.      # Check whether --enable-maintainer-mode was given.
Line 2997  do
Line 3138  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"      ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3037  do
Line 3178  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"      ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3090  do
Line 3231  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"      ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3131  do
Line 3272  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then      if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes         ac_prog_rejected=yes
        continue         continue
Line 3189  do
Line 3330  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"      ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3233  do
Line 3374  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"      ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 3679  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
Line 3820  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */  /* end confdefs.h.  */
 #include <stdarg.h>  #include <stdarg.h>
 #include <stdio.h>  #include <stdio.h>
 #include <sys/types.h>  struct stat;
 #include <sys/stat.h>  
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */  /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };  struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);  FILE * (*rcsopen) (struct buf *, struct stat *, int);
Line 3764  ac_cpp='$CPP $CPPFLAGS'
Line 3904  ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'  ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'  ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu  ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
   ac_ext=c
   ac_cpp='$CPP $CPPFLAGS'
   ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
   ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
   ac_compiler_gnu=$ac_cv_c_compiler_gnu
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
   $as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
   if ${am_cv_prog_cc_c_o+:} false; then :
     $as_echo_n "(cached) " >&6
   else
     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
   /* end confdefs.h.  */
   
   int
   main ()
   {
   
     ;
     return 0;
   }
   _ACEOF
     # Make sure it works both with $CC and with simple cc.
     # Following AC_PROG_CC_C_O, we do the test twice because some
     # compilers refuse to overwrite an existing .o file with -o,
     # though they will create one.
     am_cv_prog_cc_c_o=yes
     for am_i in 1 2; do
       if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
      ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
      ac_status=$?
      echo "$as_me:$LINENO: \$? = $ac_status" >&5
      (exit $ac_status); } \
            && test -f conftest2.$ac_objext; then
         : OK
       else
         am_cv_prog_cc_c_o=no
         break
       fi
     done
     rm -f core conftest*
     unset am_i
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
   $as_echo "$am_cv_prog_cc_c_o" >&6; }
   if test "$am_cv_prog_cc_c_o" != yes; then
      # Losing compiler, so override with the script.
      # FIXME: It is wrong to rewrite CC.
      # But if we don't then we get into trouble of one sort or another.
      # A longer-term fix would be to have automake use am__CC in this case,
      # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
      CC="$am_aux_dir/compile $CC"
   fi
   ac_ext=c
   ac_cpp='$CPP $CPPFLAGS'
   ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
   ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
   ac_compiler_gnu=$ac_cv_c_compiler_gnu
   
 DEPDIR="${am__leading_dot}deps"  DEPDIR="${am__leading_dot}deps"
   
 ac_config_commands="$ac_config_commands depfiles"  ac_config_commands="$ac_config_commands depfiles"
   
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
 am_make=${MAKE-make}  $as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
 cat > confinc << 'END'  cat > confinc.mk << 'END'
 am__doit:  am__doit:
         @echo this is the am__doit target          @echo this is the am__doit target >confinc.out
 .PHONY: am__doit  .PHONY: am__doit
 END  END
 # If we don't find an include directive, just comment out the code.  
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5  
 $as_echo_n "checking for style of include used by $am_make... " >&6; }  
 am__include="#"  am__include="#"
 am__quote=  am__quote=
 _am_result=none  # BSD make does it like this.
 # First try GNU make style include.  echo '.include "confinc.mk" # ignored' > confmf.BSD
 echo "include confinc" > confmf  # Other make implementations (GNU, Solaris 10, AIX) do it like this.
 # Ignore all kinds of additional output from `make'.  echo 'include confinc.mk # ignored' > confmf.GNU
 case `$am_make -s -f confmf 2> /dev/null` in #(  _am_result=no
 *the\ am__doit\ target*)  for s in GNU BSD; do
   am__include=include    { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
   am__quote=     (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
   _am_result=GNU     ac_status=$?
   ;;     echo "$as_me:$LINENO: \$? = $ac_status" >&5
 esac     (exit $ac_status); }
 # Now try BSD make style include.    case $?:`cat confinc.out 2>/dev/null` in #(
 if test "$am__include" = "#"; then    '0:this is the am__doit target') :
    echo '.include "confinc"' > confmf      case $s in #(
    case `$am_make -s -f confmf 2> /dev/null` in #(    BSD) :
    *the\ am__doit\ target*)      am__include='.include' am__quote='"' ;; #(
      am__include=.include    *) :
      am__quote="\""      am__include='include' am__quote='' ;;
      _am_result=BSD  esac ;; #(
     *) :
      ;;       ;;
    esac  esac
 fi    if test "$am__include" != "#"; then
       _am_result="yes ($s style)"
       break
     fi
   done
   rm -f confinc.* confmf.*
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
   $as_echo "${_am_result}" >&6; }
   
   
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5  
 $as_echo "$_am_result" >&6; }  
 rm -f confinc confmf  
   
 # Check whether --enable-dependency-tracking was given.  # Check whether --enable-dependency-tracking was given.
 if test "${enable_dependency_tracking+set}" = set; then :  if test "${enable_dependency_tracking+set}" = set; then :
   enableval=$enable_dependency_tracking;    enableval=$enable_dependency_tracking;
Line 3816  fi
Line 4015  fi
 if test "x$enable_dependency_tracking" != xno; then  if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"    am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'    AMDEPBACKSLASH='\'
     am__nodep='_no'
 fi  fi
  if test "x$enable_dependency_tracking" != xno; then   if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=    AMDEP_TRUE=
Line 3838  else
Line 4038  else
   # We make a subdir and do the tests there.  Otherwise we can end up    # We make a subdir and do the tests there.  Otherwise we can end up
   # making bogus files that we don't know about and never remove.  For    # making bogus files that we don't know about and never remove.  For
   # instance it was reported that on HP-UX the gcc test will end up    # instance it was reported that on HP-UX the gcc test will end up
   # making a dummy file named `D' -- because `-MD' means `put the output    # making a dummy file named 'D' -- because '-MD' means "put the output
   # in D'.    # in D".
     rm -rf conftest.dir
   mkdir conftest.dir    mkdir conftest.dir
   # Copy depcomp to subdir because otherwise we won't find it if we're    # Copy depcomp to subdir because otherwise we won't find it if we're
   # using a relative directory.    # using a relative directory.
Line 3873  else
Line 4074  else
     : > sub/conftest.c      : > sub/conftest.c
     for i in 1 2 3 4 5 6; do      for i in 1 2 3 4 5 6; do
       echo '#include "conftst'$i'.h"' >> sub/conftest.c        echo '#include "conftst'$i'.h"' >> sub/conftest.c
       # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with        # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
       # Solaris 8's {/usr,}/bin/sh.        # Solaris 10 /bin/sh.
       touch sub/conftst$i.h        echo '/* dummy */' > sub/conftst$i.h
     done      done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf      echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
   
     # We check with `-c' and `-o' for the sake of the "dashmstdout"      # We check with '-c' and '-o' for the sake of the "dashmstdout"
     # mode.  It turns out that the SunPro C++ compiler does not properly      # mode.  It turns out that the SunPro C++ compiler does not properly
     # handle `-M -o', and we need to detect this.  Also, some Intel      # handle '-M -o', and we need to detect this.  Also, some Intel
     # versions had trouble with output in subdirs      # versions had trouble with output in subdirs.
     am__obj=sub/conftest.${OBJEXT-o}      am__obj=sub/conftest.${OBJEXT-o}
     am__minus_obj="-o $am__obj"      am__minus_obj="-o $am__obj"
     case $depmode in      case $depmode in
Line 3891  else
Line 4092  else
       test "$am__universal" = false || continue        test "$am__universal" = false || continue
       ;;        ;;
     nosideeffect)      nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll        # After this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested        # only be used when explicitly requested.
       if test "x$enable_dependency_tracking" = xyes; then        if test "x$enable_dependency_tracking" = xyes; then
         continue          continue
       else        else
         break          break
       fi        fi
       ;;        ;;
     msvisualcpp | msvcmsys)      msvc7 | msvc7msys | msvisualcpp | msvcmsys)
       # This compiler won't grok `-c -o', but also, the minuso test has        # This compiler won't grok '-c -o', but also, the minuso test has
       # not run yet.  These depmodes are late enough in the game, and        # not run yet.  These depmodes are late enough in the game, and
       # so weak that their functioning should not be impacted.        # so weak that their functioning should not be impacted.
       am__obj=conftest.${OBJEXT-o}        am__obj=conftest.${OBJEXT-o}
Line 3983  do
Line 4184  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 4023  do
Line 4224  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"      ac_cv_prog_ac_ct_RANLIB="ranlib"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 4076  do
Line 4277  do
   IFS=$as_save_IFS    IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.    test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then    if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_YACC="$ac_prog"      ac_cv_prog_YACC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5      $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2      break 2
Line 4947  elif test `basename ./"${CC}"` = "icc" ; then
Line 5148  elif test `basename ./"${CC}"` = "icc" ; then
     CFLAGS="-g -O"      CFLAGS="-g -O"
 fi  fi
   
 GC=gc-7.2  GC=gc-7.4.2
   
 # Check whether --with-asir-gc was given.  # Check whether --with-asir-gc was given.
 if test "${with_asir_gc+set}" = set; then :  if test "${with_asir_gc+set}" = set; then :
Line 5032  do
Line 5233  do
     for ac_prog in grep ggrep; do      for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"        ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue        as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.  # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP    # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in  case `"$ac_path_GREP" --version 2>&1` in
Line 5098  do
Line 5299  do
     for ac_prog in egrep; do      for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do      for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"        ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue        as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.  # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP    # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in  case `"$ac_path_EGREP" --version 2>&1` in
Line 5353  else
Line 5554  else
 fi  fi
   
   
   GMPLIB="-L${libdir} -lmpc -lmpfr -lgmp"
   # Check whether --enable-static_gmp was given.
   if test "${enable_static_gmp+set}" = set; then :
     enableval=$enable_static_gmp; enable_static_gmp=yes
   else
     enable_static_gmp=no
   fi
   
   if test ${enable_static_gmp:=no} != no ; then
       GMPLIB='${libdir}/libmpc.a ${libdir}/libmpfr.a ${libdir}/libgmp.a'
   fi
   
   
 # Check whether --enable-interval was given.  # Check whether --enable-interval was given.
 if test "${enable_interval+set}" = set; then :  if test "${enable_interval+set}" = set; then :
   enableval=$enable_interval; enable_interval=${enableval}    enableval=$enable_interval; enable_interval=${enableval}
Line 5432  i[3-6]86-*-linux*|x86-*-linux*)
Line 5646  i[3-6]86-*-linux*|x86-*-linux*)
     $as_echo "#define _BSD_SOURCE 1" >>confdefs.h      $as_echo "#define _BSD_SOURCE 1" >>confdefs.h
   
     ;;      ;;
 *-*-cygwin*)  i[3-6]86-*-cygwin*|x86-*-cygwin*)
     asm_obj="${i386_aout_obj}"      asm_obj="${i386_aout_obj}"
     ;;      ;;
 i[3-6]86-*-interix*)  i[3-6]86-*-interix*)
Line 5458  sparc-sun-solaris2.*)
Line 5672  sparc-sun-solaris2.*)
     asm_obj="${generic_obj}"      asm_obj="${generic_obj}"
     $as_echo "#define __DARWIN__ 1" >>confdefs.h      $as_echo "#define __DARWIN__ 1" >>confdefs.h
   
       if test -d /usr/X11/include -a x"${X_CFLAGS}" = x ; then
           X_CFLAGS=-I/usr/X11/include
       fi
     ;;      ;;
 arm*-*-linux*)  arm*-*-linux*)
     asm_obj="${generic_obj}"      asm_obj="${generic_obj}"
Line 5465  arm*-*-linux*)
Line 5682  arm*-*-linux*)
         CFLAGS="${CFLAGS} -fsigned-char"          CFLAGS="${CFLAGS} -fsigned-char"
     fi      fi
     ;;      ;;
   *-*-mingw*)
           WSLIB="-lws2_32"
       asm_obj="${generic_obj}"
       ;;
 *)  *)
     asm_obj="${generic_obj}"      asm_obj="${generic_obj}"
     ;;      ;;
Line 5472  esac
Line 5693  esac
   
   
   
   
   for ac_func in sigaction
   do :
     ac_fn_c_check_func "$LINENO" "sigaction" "ac_cv_func_sigaction"
   if test "x$ac_cv_func_sigaction" = xyes; then :
     cat >>confdefs.h <<_ACEOF
   #define HAVE_SIGACTION 1
   _ACEOF
   
   fi
   done
   
 ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"  ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"
 if test "x$ac_cv_func_socket" = xyes; then :  if test "x$ac_cv_func_socket" = xyes; then :
   
Line 5575  fi
Line 5808  fi
 fi  fi
   
   
 ac_config_files="$ac_config_files Makefile engine/Makefile asm/Makefile builtin/Makefile fft/Makefile include/Makefile io/Makefile lib/Makefile parse/Makefile plot/Makefile"  ac_config_files="$ac_config_files Makefile engine/Makefile asm/Makefile builtin/Makefile fft/Makefile include/Makefile io/Makefile lib/Makefile parse/Makefile plot/Makefile asir2000"
   
 cat >confcache <<\_ACEOF  cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure  # This file is a shell script that caches the results of configure
Line 5722  LIBOBJS=$ac_libobjs
Line 5955  LIBOBJS=$ac_libobjs
 LTLIBOBJS=$ac_ltlibobjs  LTLIBOBJS=$ac_ltlibobjs
   
   
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
   $as_echo_n "checking that generated files are newer than configure... " >&6; }
      if test -n "$am_sleep_pid"; then
        # Hide warnings about reused PIDs.
        wait $am_sleep_pid 2>/dev/null
      fi
      { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
   $as_echo "done" >&6; }
  if test -n "$EXEEXT"; then   if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=    am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'    am__EXEEXT_FALSE='#'
Line 6044  if (echo >conf$$.file) 2>/dev/null; then
Line 6285  if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:      # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.      # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.      # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
     # In both cases, we have to default to `cp -p'.      # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||      ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
       as_ln_s='cp -p'        as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then    elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln      as_ln_s=ln
   else    else
     as_ln_s='cp -p'      as_ln_s='cp -pR'
   fi    fi
 else  else
   as_ln_s='cp -p'    as_ln_s='cp -pR'
 fi  fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file  rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null  rmdir conf$$.dir 2>/dev/null
Line 6113  else
Line 6354  else
   as_mkdir_p=false    as_mkdir_p=false
 fi  fi
   
 if test -x / >/dev/null 2>&1; then  
   as_test_x='test -x'  
 else  
   if ls -dL / >/dev/null 2>&1; then  
     as_ls_L_option=L  
   else  
     as_ls_L_option=  
   fi  
   as_test_x='  
     eval sh -c '\''  
       if test -d "$1"; then  
         test -d "$1/.";  
       else  
         case $1 in #(  
         -*)set "./$1";;  
         esac;  
         case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((  
         ???[sx]*):;;*)false;;esac;fi  
     '\'' sh  
   '  
 fi  
 as_executable_p=$as_test_x  
   
   # as_fn_executable_p FILE
   # -----------------------
   # Test if FILE is an executable regular file.
   as_fn_executable_p ()
   {
     test -f "$1" && test -x "$1"
   } # as_fn_executable_p
   as_test_x='test -x'
   as_executable_p=as_fn_executable_p
   
 # Sed expression to map a string onto a valid CPP name.  # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"  as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
   
Line 6155  cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
Line 6384  cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their  # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.  # values after options handling.
 ac_log="  ac_log="
 This file was extended by $as_me, which was  This file was extended by asir $as_me 1.15, which was
 generated by GNU Autoconf 2.68.  Invocation command line was  generated by GNU Autoconf 2.69.  Invocation command line was
   
   CONFIG_FILES    = $CONFIG_FILES    CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS    CONFIG_HEADERS  = $CONFIG_HEADERS
Line 6212  _ACEOF
Line 6441  _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"  ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\  ac_cs_version="\\
 config.status  asir config.status 1.15
 configured by $0, generated by GNU Autoconf 2.68,  configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"    with options \\"\$ac_cs_config\\"
   
 Copyright (C) 2010 Free Software Foundation, Inc.  Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation  This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."  gives unlimited permission to copy, distribute and modify it."
   
Line 6296  fi
Line 6525  fi
 _ACEOF  _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then  if \$ac_cs_recheck; then
   set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion    set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift    shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6    \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'    CONFIG_SHELL='$SHELL'
Line 6320  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
Line 6549  cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 #  #
 # INIT-COMMANDS  # INIT-COMMANDS
 #  #
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"  AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
   
 _ACEOF  _ACEOF
   
Line 6341  do
Line 6570  do
     "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;      "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
     "parse/Makefile") CONFIG_FILES="$CONFIG_FILES parse/Makefile" ;;      "parse/Makefile") CONFIG_FILES="$CONFIG_FILES parse/Makefile" ;;
     "plot/Makefile") CONFIG_FILES="$CONFIG_FILES plot/Makefile" ;;      "plot/Makefile") CONFIG_FILES="$CONFIG_FILES plot/Makefile" ;;
       "asir2000") CONFIG_FILES="$CONFIG_FILES asir2000" ;;
   
   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;    *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac    esac
Line 6771  $as_echo "$as_me: executing $ac_file commands" >&6;}
Line 7001  $as_echo "$as_me: executing $ac_file commands" >&6;}
   
   case $ac_file$ac_mode in    case $ac_file$ac_mode in
     "depfiles":C) test x"$AMDEP_TRUE" != x"" || {      "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
   # Autoconf 2.62 quotes --file arguments for eval, but not when files    # Older Autoconf quotes --file arguments for eval, but not when files
   # are listed without --file.  Let's play safe and only enable the eval    # are listed without --file.  Let's play safe and only enable the eval
   # if we detect the quoting.    # if we detect the quoting.
   case $CONFIG_FILES in    # TODO: see whether this extra hack can be removed once we start
   *\'*) eval set x "$CONFIG_FILES" ;;    # requiring Autoconf 2.70 or later.
   *)   set x $CONFIG_FILES ;;    case $CONFIG_FILES in #(
   esac    *\'*) :
       eval set x "$CONFIG_FILES" ;; #(
     *) :
       set x $CONFIG_FILES ;; #(
     *) :
        ;;
   esac
   shift    shift
   for mf    # Used to flag and report bootstrapping failures.
     am_rc=0
     for am_mf
   do    do
     # Strip MF so we end up with the name of the file.      # Strip MF so we end up with the name of the file.
     mf=`echo "$mf" | sed -e 's/:.*$//'`      am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
     # Check whether this is an Automake generated Makefile or not.      # Check whether this is an Automake generated Makefile which includes
     # We used to match only the files named `Makefile.in', but      # dependency-tracking related rules and includes.
     # some people rename them; so instead we look at the file content.      # Grep'ing the whole file directly is not great: AIX grep has a line
     # Grep'ing the first line is not enough: some people post-process  
     # each Makefile.in and add a new line on top of each file to say so.  
     # Grep'ing the whole file is not good either: AIX grep has a line  
     # limit of 2048, but all sed's we know have understand at least 4000.      # limit of 2048, but all sed's we know have understand at least 4000.
     if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then      sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
       dirpart=`$as_dirname -- "$mf" ||        || continue
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \      am_dirpart=`$as_dirname -- "$am_mf" ||
          X"$mf" : 'X\(//\)[^/]' \| \  $as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
          X"$mf" : 'X\(//\)$' \| \           X"$am_mf" : 'X\(//\)[^/]' \| \
          X"$mf" : 'X\(/\)' \| . 2>/dev/null ||           X"$am_mf" : 'X\(//\)$' \| \
 $as_echo X"$mf" |           X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
   $as_echo X"$am_mf" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{      sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
             s//\1/              s//\1/
             q              q
Line 6814  $as_echo X"$mf" |
Line 7050  $as_echo X"$mf" |
             q              q
           }            }
           s/.*/./; q'`            s/.*/./; q'`
     else      am_filepart=`$as_basename -- "$am_mf" ||
       continue  $as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
     fi           X"$am_mf" : 'X\(//\)$' \| \
     # Extract the definition of DEPDIR, am__include, and am__quote           X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
     # from the Makefile without running `make'.  $as_echo X/"$am_mf" |
     DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`      sed '/^.*\/\([^/][^/]*\)\/*$/{
     test -z "$DEPDIR" && continue  
     am__include=`sed -n 's/^am__include = //p' < "$mf"`  
     test -z "am__include" && continue  
     am__quote=`sed -n 's/^am__quote = //p' < "$mf"`  
     # When using ansi2knr, U may be empty or an underscore; expand it  
     U=`sed -n 's/^U = //p' < "$mf"`  
     # Find all dependency output files, they are included files with  
     # $(DEPDIR) in their names.  We invoke sed twice because it is the  
     # simplest approach to changing $(DEPDIR) to its actual value in the  
     # expansion.  
     for file in `sed -n "  
       s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \  
          sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do  
       # Make sure the directory exists.  
       test -f "$dirpart/$file" && continue  
       fdir=`$as_dirname -- "$file" ||  
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \  
          X"$file" : 'X\(//\)[^/]' \| \  
          X"$file" : 'X\(//\)$' \| \  
          X"$file" : 'X\(/\)' \| . 2>/dev/null ||  
 $as_echo X"$file" |  
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{  
             s//\1/              s//\1/
             q              q
           }            }
           /^X\(\/\/\)[^/].*/{            /^X\/\(\/\/\)$/{
             s//\1/              s//\1/
             q              q
           }            }
           /^X\(\/\/\)$/{            /^X\/\(\/\).*/{
             s//\1/              s//\1/
             q              q
           }            }
           /^X\(\/\).*/{  
             s//\1/  
             q  
           }  
           s/.*/./; q'`            s/.*/./; q'`
       as_dir=$dirpart/$fdir; as_fn_mkdir_p      { echo "$as_me:$LINENO: cd "$am_dirpart" \
       # echo "creating $dirpart/$file"        && sed -e '/# am--include-marker/d' "$am_filepart" \
       echo '# dummy' > "$dirpart/$file"          | $MAKE -f - am--depfiles" >&5
     done     (cd "$am_dirpart" \
         && sed -e '/# am--include-marker/d' "$am_filepart" \
           | $MAKE -f - am--depfiles) >&5 2>&5
      ac_status=$?
      echo "$as_me:$LINENO: \$? = $ac_status" >&5
      (exit $ac_status); } || am_rc=$?
   done    done
     if test $am_rc -ne 0; then
       { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
   $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
   as_fn_error $? "Something went wrong bootstrapping makefile fragments
       for automatic dependency tracking.  Try re-running configure with the
       '--disable-dependency-tracking' option to at least be able to build
       the package (albeit without support for automatic dependency tracking).
   See \`config.log' for more details" "$LINENO" 5; }
     fi
     { am_dirpart=; unset am_dirpart;}
     { am_filepart=; unset am_filepart;}
     { am_mf=; unset am_mf;}
     { am_rc=; unset am_rc;}
     rm -f conftest-deps.mk
 }  }
  ;;   ;;
   
Legend:
Removed from v.1.53  
changed lines
  Added in v.1.69
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>